Owing to the increase in participation of private sector in infrastructure, and government commitments to develop infrastructure, the demand of pick and carry cranes is on the rise. Indubitably, these cranes have simplified jobs for the construction industry, but there is an inevitable need to focus on the safety while operating this machine.
From the attachments used to the weight of the load to be carried, there are several factors that must be taken into consideration for safe use of pick and carry cranes. Operators using the machine to lift freely suspended loads should ascertain to avoid slopes, and see that the load is within the allowed rated lifting capacity of the manufacturer. The derating charts provided by some crane dealers India help determine rated lifting capacity of a crane on a particular side slope.
Correct selection of cranes is extremely important for not only precise completion of job, but also to ensure safe working on the job site. However, different factors determine correct selection of cranes, including the following:
>> Dimension and weight of load to be lifted and shifted
>> Height of lift as well as distances
>> Number of lifts and their frequency
>> Time period for the lifting operation
>> Ground conditions
Besides these factors, a few other considerations are crucial.
Testing and assessment
Qualified and experienced examiners must ensure to test and examine the cranes. Each component should be thoroughly tested for any damage or fault that can have an adverse affect on the performance of a crane, or result in negative consequences when the machine is operated.
Safe working load
Also known as SWL, Safe Working Load should be specified based on the results obtained post assessment and examination of a crane. Operators must stick to the set limit, and make sure not to exceed the load at the time of lifting operation.
Repair and maintenance
Thorough inspection of crane components is necessary to find out if there are any components that need repair or replacement. It is viable to replace the components that cannot be repaired. Once a component has been repaired or replaced, make sure to maintain the same to keep them up and working.
Other safety instructions while operating pick and carry cranes include the following:
>> Operate a crane on a level ground capable of supporting the load and the weight of the crane.
>> Extend the outriggers of crane prior to lifting and ascertain that they are stable on the ground.
>> Ensure that the weight of the load is within safe working load limit.
>> Do not drag the load on the ground.
>> Adjust the boom length such that the crane operates within the safe operation radius.
>> Adjust the boom angle as per the safe working condition when moving uphill or downhill.
The use of pick and carry cranes has really made things easier for the infrastructure sector. However, it is important for all those working with the cranes, directly or indirectly, to take the safety measures to prevent any unpleasant consequences.
From the attachments used to the weight of the load to be carried, there are several factors that must be taken into consideration for safe use of pick and carry cranes. Operators using the machine to lift freely suspended loads should ascertain to avoid slopes, and see that the load is within the allowed rated lifting capacity of the manufacturer. The derating charts provided by some crane dealers India help determine rated lifting capacity of a crane on a particular side slope.
Correct selection of cranes is extremely important for not only precise completion of job, but also to ensure safe working on the job site. However, different factors determine correct selection of cranes, including the following:
>> Dimension and weight of load to be lifted and shifted
>> Height of lift as well as distances
>> Number of lifts and their frequency
>> Time period for the lifting operation
>> Ground conditions
Besides these factors, a few other considerations are crucial.
Testing and assessment
Qualified and experienced examiners must ensure to test and examine the cranes. Each component should be thoroughly tested for any damage or fault that can have an adverse affect on the performance of a crane, or result in negative consequences when the machine is operated.
Safe working load
Also known as SWL, Safe Working Load should be specified based on the results obtained post assessment and examination of a crane. Operators must stick to the set limit, and make sure not to exceed the load at the time of lifting operation.
Repair and maintenance
Thorough inspection of crane components is necessary to find out if there are any components that need repair or replacement. It is viable to replace the components that cannot be repaired. Once a component has been repaired or replaced, make sure to maintain the same to keep them up and working.
Other safety instructions while operating pick and carry cranes include the following:
>> Operate a crane on a level ground capable of supporting the load and the weight of the crane.
>> Extend the outriggers of crane prior to lifting and ascertain that they are stable on the ground.
>> Ensure that the weight of the load is within safe working load limit.
>> Do not drag the load on the ground.
>> Adjust the boom length such that the crane operates within the safe operation radius.
>> Adjust the boom angle as per the safe working condition when moving uphill or downhill.
The use of pick and carry cranes has really made things easier for the infrastructure sector. However, it is important for all those working with the cranes, directly or indirectly, to take the safety measures to prevent any unpleasant consequences.
