Making safe use of pick and carry cranes

Owing to the increase in participation of private sector in infrastructure, and government commitments to develop infrastructure, the demand of pick and carry cranes is on the rise. Indubitably, these cranes have simplified jobs for the construction industry, but there is an inevitable need to focus on the safety while operating this machine.

From the attachments used to the weight of the load to be carried, there are several factors that must be taken into consideration for safe use of pick and carry cranes. Operators using the machine to lift freely suspended loads should ascertain to avoid slopes, and see that the load is within the allowed rated lifting capacity of the manufacturer. The derating charts provided by some crane dealers India help determine rated lifting capacity of a crane on a particular side slope.

Correct selection of cranes is extremely important for not only precise completion of job, but also to ensure safe working on the job site. However, different factors determine correct selection of cranes, including the following:

>> Dimension and weight of load to be lifted and shifted
>> Height of lift as well as distances
>> Number of lifts and their frequency
>> Time period for the lifting operation
>> Ground conditions

Besides these factors, a few other considerations are crucial.

Testing and assessment

Qualified and experienced examiners must ensure to test and examine the cranes. Each component should be thoroughly tested for any damage or fault that can have an adverse affect on the performance of a crane, or result in negative consequences when the machine is operated.

Safe working load

Also known as SWL, Safe Working Load should be specified based on the results obtained post assessment and examination of a crane. Operators must stick to the set limit, and make sure not to exceed the load at the time of lifting operation.

Repair and maintenance

Thorough inspection of crane components is necessary to find out if there are any components that need repair or replacement. It is viable to replace the components that cannot be repaired. Once a component has been repaired or replaced, make sure to maintain the same to keep them up and working.

Other safety instructions while operating pick and carry cranes include the following:

>> Operate a crane on a level ground capable of supporting the load and the weight of the crane.
>> Extend the outriggers of crane prior to lifting and ascertain that they are stable on the ground.
>> Ensure that the weight of the load is within safe working load limit.
>> Do not drag the load on the ground.
>> Adjust the boom length such that the crane operates within the safe operation radius.
>> Adjust the boom angle as per the safe working condition when moving uphill or downhill.

The use of pick and carry cranes has really made things easier for the infrastructure sector. However, it is important for all those working with the cranes, directly or indirectly, to take the safety measures to prevent any unpleasant consequences.

Read More

Gaining an insight into the advantages of a hydraulic crane

When it comes to lifting objects, one of the most powerful ways is by using a hydraulic crane. By harnessing the strength produced by liquid under pressure, as well as the ease with which it can be used, comparatively small amount of effort can be transferred from one place to another, and a hydraulic crane is one of the most reliable lifting systems available in today's workplace.

A hydraulic system operates with a system of pumps as well as pistons filled with liquid, generally light water or oil. Movement of the liquid under pressure from the pumps causes the pistons to extend or reduce. When connected to a system of levers, these pistons help lift heavy weights.

Owing to the use of hydraulic cranes as the fixed system of pipes, it is easy to maintain constant pressure once a part of hydraulic system has been brought into the place. This makes the hydraulic cranes stable in use and hence they are capable of supporting considerably large weights.

A high pressure hydraulic crane allows the use of a light weight system that requires comparatively small amount of power to transfer the objects. These types of cranes can also be hand powered under certain conditions and they provide the same results as those delivered by a power system but relatively slower.

Hydraulic cranes are the simplest systems that can be used within any industrial process. Not only this, they are easy to maintain. These cranes can operate for a long period of time if the pumps are regularly inspected for any leaks and the possible stress points supporting the levers are checked for any damage.

Hydraulic cranes are usually light in weight and thus can be easily moved from one place to another within the distribution center, factory, or any other job site. This makes them a multi-faceted tool that can be used to perform different day to day operations. Be it performing a loading job in the loading bay area where one can make use of portable hydraulic cranes to lift and transfer objects into a waiting truck, or performing a more complex job in the main factory, a hydraulic crane has got you covered.

Different hydraulic cranes are available on the market for different purposes. The most common system is based on the jib lifted by using a piston. However, more complex versions can also be found. You need to seek the right hydraulic crane manufacturer to find the right equipment for your job.

When it comes to performing the light lifting jobs, smaller hydraulic cranes which can be easily moved from one area to another are extremely useful. They can often be hand powered by using a manual pump. Although they have the ability to support heavy weight, the actual lifting process can be challenging and you need to use a heavier duty system that makes use of electric power for pumping system.

If you are planning to purchase a hydraulic crane for your job, count on one of the leading crane dealers India to find the right machine that serves your needs efficiently.

Read More

All you need to know about hydraulic crane

When it comes to using a powerful means to lift objects with strength, hydraulic crane makes an ideal option. Owing to the strength offered by the liquid under pressure, along with the ease of using the same, transfer of small amount of effort from one place to another is relatively easier. Hydraulic cranes are deemed one of the most effective lifting systems in the modern workplace.

Basically, a system of pumps and pistons filled with liquid, such as light oil or water, is what helps a hydraulic system to work. As the liquid under pressure moves from the pumps, the pistons are extended or reduced. Being connected to levers, these pistons can lift heavy loads.

A fixed system of pipes fitted within hydraulic cranes allow constant pressure to be maintained once a part of the system has been moved into place. This makes them highly stable for use and ultimately they are able to support comparatively larger weights.

A high pressure hydraulic crane can be used with a fairly light weight system that utilizes small amount of power so as to move the objects around. What is interesting is that these systems can be actually hand powered under certain conditions and they deliver the same results as those obtained from a power system, although at relatively slower speed.

Easy to maintain, hydraulic cranes are one of the simplest systems for use in industrial processes. Not only this, they can efficiently perform for considerably long period of time, provided its pistons and pumps are regularly inspected for leaks and potential stress points to support the levers are thoroughly checked for damage.

Owing to light weight that majority hydraulic cranes are known to have, they can be easily moved from one place to another within a distribution center or a factory and this quality of these cranes make them suitable tool for use. Whether it is a simple loading job where objects have to be loaded into the truck or a more complex job in a factory, these cranes are helpful in carrying out wide variety of jobs with ease.

Diverse categories of hydraulic cranes available on the market serve varied purposes. Even though relatively more intricate versions are also available with crane dealers India, the most common systems depend on a jib that is lifted by use of a piston. A few other cranes use a cantilever to balance the weight being lifted, enhancing the capability of the system to manage relatively higher weights than it could earlier support with ease.

Given that smaller hydraulic cranes seamlessly move from one place to another, they are perfect for light lifting jobs and are usually hand powered utilizing a manual pump. Even though they are capable of supporting heavy weight, the process can be a bit difficult with heavy weights. However, a heavier duty system that utilizes electric power for its pumping system can be used.

Whatever your purpose behind requiring a crane might be, ensure to get in touch with a leading hydraulic crane manufacturer to ensure you get a right system that will efficiently serve your needs for many years to come.

Read More